Toptul L = 225 mm 1/4 3/8 C.V.Joint Banding Tool

C.V. Joint Banding Tool (with cutter)

• ITEM NO: JEAE0423
• Use to install and tighten the band-it and strap style clamp on CV joint boots, power steering rack and pinion steering gear boots
• Bands are installed into the tool and tightened by turning the tool handle
• Use a 1/2″ socket/wrench or by hand to wind the band until sufficient tension is applied
• When boot clamp has been tightened to specs, the built in cutter cuts the band by flipping tool lever (at the front of the tool) forward
• Tool is easily removed by sliding sideways after the band is tightened